杰凯特 Jaquet Speed Sensor E16S40 (MPN: 385Z-05583) 速度传感器-天津启隆机电设备有限公司

杰凯特 Jaquet Speed Sensor E16S40 (MPN: 385Z-05583) 速度传感器

2025-07-01

Frequency range Up to 20 kHz, lower limit depending on application

Housing M16x1.5, tightening torque: max. 35 Nm

Connection Cable with open leads:

3-wire, 3 x 0.34 mm2 (AWG22), stranded wires, elastomer isolation, green

casing, fire retardant, low smoke, RoHS conform and halogen free, max.

outer Ø = 4.8 mm, min. bending radius = 25 mm (static) and 50 mm (dynamic),

cable length according to dimensional drawing

Protection Sensor head: IP68

Connector: IP67

Insulation Housing and electronics galvanically isolated (Test: 500 V, 50 Hz for 1 minute)

Pole wheel Prerequisite: Toothed wheel of a ferrous material (e.g. Steel 1.0036).

Optimal performance with

Involute gear Tooth width > 10 mm

Side offset < 0.2 mm

Eccentricity < 0.2 mm

Air gap between sensor Depending on lowest circumferential speed which has to be detected and on

and pole wheel trigger level. See figure

Operating temperature –40°C…125°C