英格索兰 Ingersoll Rand (Joy/Cooper/Cameron) 空压机 MLM控制盘-天津启隆机电设备有限公司

英格索兰 Ingersoll Rand (Joy/Cooper/Cameron) 空压机 MLM控制盘

2023-03-30

生产厂家：Ingersoll Rand(IR)/CAMERON
Ingersoll Rand(IR)/CAMERON ID：AAP3798102-00130
停产型号Other Part#：P3798102-00031, AAP37P3798102-00000，P37P3798102-00000

Ingersoll Rand/CAMERON MLM控制盘性能描述（或称：COOPER离心式空压机控制盘，控制板，控制器,MAIN LOGIC MODULE, MLM）

INPUT / OUTPUT MODULE SPECIFICATIONS

The IO module provides RTD inputs; analog inputs and outputs; and digital inputs and outputs. The IO module will communicate to the Control Module using a serial CANBus interface. Multiple IO modules can be dropped on the CANBus interface to allow IO expansion when required. Identical IO modules will be used for IO expansion.

Environmental:

Operating temperature range: 32°F – 122°F (0 – 50°C) minimum rage
Storage temperature range: -10°F to 140°F (-23 – 60°C) minimum range
Max relative humidity: 92.5% non-condensing to 2000m altitude
Ingress rating: NEMA 1 (to be mounted in NEMA12 to 4x enclosure)
Power requirement: 24Vdc to control board; 100 – 240VAC to be supplied to panel
UL / CSA / CE approvals
Hazardous area purged panel applications

Module Power Requirements:

Voltage: 24VDC
Power: 50W

IO Module Inputs:

– Analog inputs (qty 13)
4 – 20ma; 12- bit resolution; 0.5 % accuracy; channel common reference to controller common
– Motor current analog input (qty 1)
Current rating: 0 – 5A ac; Voltage rating: 0 – 30Vac max
– On-board analog input for monitoring 24Vdc power supply (qty 1)
– Temperature sensor inputs (qty 10)
3-wire RTD, 100 ohm PT; 12- bit resolution; 0.5 % accuracy
– Analog outputs (qty 4)
4-20ma; 10 or 12 bit resolution
– Digital inputs (qty 10)
Dry contact; 24Vdc sinking; LED indicator on each channel
– Digital outputs (24Vdc) (qty 11)
Load rating: 1Adc per output, 6Adc max load all digital outputs
Isolated / protected; LED indicator on each channel
– Emergency stop dry contact input channel (qty 1)
Failsafe interlocks: with motor output channel & emergency stop input
Solid state motor 24Vdc control output

I/O Expansion Module:

Up to 3 IO modules can be attached to the CANBus interface to allow additional IO expansion.
Each IO module will have a unique CANBus ID number.

Weight: 5lbs (2.27Kg)

Dimensions: 17.5″ (44.5cm) H x 8″ (20.3cm) W x 3″ (7.6cm) D

Environment: Operating temperature range: 32F to 140F (0C to 60C).

Storage temperature range: -10F to 140F (-25C to 60C).

Maximum 95% relative humidity (non-condensing).

Power Requirements: 100-240VAC, 10 Amp, 50-60hz.

Power Fuse: 10 Amp, 250VAC, Type F

Power Buss: 100-240VAC, 10 Amp, 50-60hz.

Communications:              C-Link Network Port (RS-485)
                                       Modbus Port (RS-485)
                                         MLM Communications Port, Supports 2-3 Modules.

Monitoring Inputs:              (13) 4-20mA Current Loop Analog Inputs
                                        (10) RTD Temperature Sensor Inputs
                                        (8) 24VDC Digital Inputs
                                        (1) 0 – 5 Amp Current Transducer Input
                                        (1) 100 – 240VAC Digital Input (Optically Isolated
                                        Solid State Relay 5 Amp Maximum Load)

Control Outputs: (4) 4-20mA Current Loop Analog Outputs
(12) 240VAC Digital Outputs (Solid-state relay, 5 Amp Maximum load)

Digital Output Fuse 5 Amp, 250VAC, Type F

Safety Approvals:           (UL) Underwriters laboratories. USA and Mexico, Compliance with
                                       applicable requirements of UL3111-1: 1994
                                       CUL) Canadian Underwriters laboratories. Canada Compliance with
                                       applicable requirements of CAN/CSA – C22.2 No. 1010.1-92
                                       (CE) Marking for the European Union. Compliance with applicable
                                       requirements of the EMC and Low Voltage directives.

技术支持：VANTAGE软件程序灌装，控制板故障判断。

技术支持：MU软件程序参数更改，压缩机运行故障判断。