E2S STExCP8-PB 报警呼叫按钮

2021-07-25

E2S STExCP8-PB Push Button Call Point 报警呼叫按钮

E2S STExCP8-PB 隔爆、闭锁、双动、扭转和按钮手动呼叫点，具有 316L 不锈钢外壳，专为最恶劣的环境而设计。批准用于 1 区和 2 区危险区域的火灾和气体报警系统以及紧急停机和过程控制应用。提供标准 DIN 导轨端子或创新的 E2S 终端板，为现场安装的 EOL 和/或系列设备提供专用连接。SIL 2 符合 IEC 61508 (2010)。DNV 类型批准用于暴露位置。

• 坚固的防腐蚀 316L 不锈钢外壳
• 环氧粉末涂层漆面
• 可提供其他外壳颜色以满足特定要求
• 防护等级 IP66
• 单或双开关
• 可选的设备标签和职责标签
• 包括 2 × 316 不锈钢塞
• 3 x M20 电缆入口
• 不锈钢紧固件
• DNV 型式认证 IEC 60945 和 DNVGL-CG-0339

Version:	Part reference:	Description:
Product type:	STExCP8PB	Dual action latching push button with manual reset
Switch Type: [s]	S D	SPCO/SPDT DPCO/DPDT
Terminals: [t]	D P	DIN Rail 8 × SAK2.5 Termination board: 6 × 2.5mm² terminals plus 4 × EOL & Series terminals
Lift flap: [l]	N	Not available
Cable Entry Type:[e]	A B C D E F G	3 x M20x1.5mm 2 × 1/2″ NPT – adaptors 2 × 3/4″ NPT – adaptors 2 x M25x1.5mm – adaptors 1 × 1/2″ NPT – adaptor 1 × 3/4″ NPT – adaptor 1 x M25x1.5mm – adaptor
Stopping plug material: [m]	S	Stainless Steel
Duty label / Equipment tag: [d]:	1 2 3 4 5 6 7	No Duty label, no Equip. tag Duty label Stainless Steel Duty label St/St + Equip. tag Duty label Metalised Polyester Duty label M. Poly. + Equip. tag Equip. tag only Special label requirement
Product version: [v]	A1	IECEx, ATEX, Ex EAC, PESO & DNV approved
Enclosure colour: [x]	R B N Y V S K M Z	Red Blue Green Yellow Red/White Yellow/Black Black Magenta Red/Black
Default variable: [u]	N	Default = N – not currently used
E.O.L.Module: [e] optional	ExxxR ED1 ExxxZ	Resistor value in Ohms e.g. E470R = 470 Ohm Diode IN4007 = ED1 Zener diode e.g. E5V1Z = 5.1V
Series Module: [s] optional	SxxxR SD1 SxxxZ	Resistor value in Ohms e.g. S1K5R = 1.5K Ohm Diode IN4007 = SD1 Zener diode e.g. S5V1Z = 5.1V
Accessories:
SP65-0001-A2 SP65-0001-A4 SP65-0002-A2 SP65-0002-A4	Pole Mount Bracket Kit 2″ St/St A2 (304) Pole Mount Bracket Kit 2″ St/St A4 (316) Sunshade – St/St A2 (304) Sunshade – St/St A4 (316)

STExCP8PBDPN
STExCP8PBDDN
STExCP8PBSPN
STExCP8PBSDN