PR Electronics 2-wire programmable transmitter PR 6334B-天津启隆机电设备有限公司

PR6334B Two-wire programmable transmitter

Supply
Supply voltage	7.2…30 VDC
Max. required power	≤ 0.7 W/≤ 1.4 W (1 ch./2 ch.)
Power dissipation, per channel	0.17…0.7 W
Isolation voltage
Isolation voltage, test / working	1.5 kVAC / 50 VAC
Response time
Response time (programmable)	1…60 s
Voltage drop	7.2 VDC
Warm-up time	5 min.
Programming	PR 5909 Loop Link communications interface
Signal / noise ratio	Min. 60 dB
Accuracy	Better than 0.05% of selected range
EEprom error check	< 3.5 s
Signal dynamics, input	18 bit
Signal dynamics, output	16 bit
Effect of supply voltage change	< 0.005% of span / VDC
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span

Common input specifications
Max. offset	50% of selected max. value
TC input
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC)	< ±1.0°C
Voltage input
Measurement range	-12…150 mV
Min. measurement range (span)	5 mV
Input resistance	10 MΩ