PR Electronics Temperature / mA converter PR 9113A
2026-03-31
PR9113A Temperature / mA converter
Common specifications
| Supply voltage |
19.2…31.2 VDC |
| Fuse |
400 mA SB / 250 VAC |
| Max. required power |
≤ 0.8 W/≤ 1.4 W (1 ch./2 ch.) |
| Max. power dissipation, 1 / 2 ch. |
≤ 0.8 W / ≤ 1.4 W |
| Test /working: Input to any |
2.6 kVAC / 300 VAC reinforced isolation |
| Analog output to supply |
2.6 kVAC / 300 VAC reinforced isolation |
| Status relay to supply |
1.5 kVAC / 150 VAC reinforced isolation |
| Temperature input, programmable (0…90%, 100…10%) |
1…60 s |
| mA / V input (programmable) |
0.4…60 s |
| Programming |
PR 4500 communication interfaces |
| Signal / noise ratio |
Min. 60 dB (0…100 kHz) |
| Signal dynamics, input |
24 bit |
| Signal dynamics, output |
16 bit |
| Accuracy |
Better than 0.1% of sel. range |
| EMC immunity influence |
< ±0.5% of span |
| Extended EMC immunity: NAMUR NE21, A criterion, burst |
< ±1% of span |
Input specifications
| RTD type |
Pt10/20/50/100/200/250; Pt300/Pt400/500/1000; Ni50/100/120/1000 |
| Cable resistance per wire |
50 Ω (max.) |
| Sensor current |
Nom. 0.2 mA |
| Effect of sensor cable resistance (3-/4-wire) |
< 0.002 Ω / Ω |
| Sensor error detection |
Programmable ON / OFF |
| Thermocouple type |
B, E, J, K, L, N, R, S, T, U, W3, W5, LR |
| Cold junction compensation (CJC) via ext. sensor in 5910 |
20…28°C ≤ ±1°C, -20…20°C / 28…70°C ≤ 2°C |
| CJC via int. mounted sensor |
±(2.0°C + 0.4°C * Δt) |
| Sensor error detection |
Programmable ON or OFF (only wire breakage) |
| Sensor error current: When detecting / else |
Nom. 2 μA / 0 μA |
| Measurement range |
0…23 mA |
| Programmable measurement ranges |
0…20 and 4…20 mA |
| Input resistance |
Nom. 20 Ω + PTC 50 Ω |
| Sensor error detection |
Programmable ON / OFF |
Output specifications
| Signal range |
0…23 mA |
| Programmable signal ranges |
0…20/4…20/20…0/20…4 mA |
| Load (@ current output) |
≤ 600 Ω |
| Load stability |
≤ 0.01% of span / 100 Ω |
| Sensor error indication |
0 / 3.5 / 23 mA / none |
| NAMUR NE43 Upscale/Downscale |
23 mA / 3.5 mA |
| Output limitation, on 4…20 and 20…4 mA signals |
3.8…20.5 mA |
| Output limitation, on 0…20 and 20…0 mA signals |
0…20.5 mA |
| Current limit |
≤ 28 mA |
| Max. external 2-wire supply |
26 VDC |
| Effect of external 2-wire supply voltage variation |
< 0.005% of span / V |
| Max. voltage |
125 VAC / 110 VDC |
| Max. current |
0.5 AAC / 0.3 ADC |
| Max. AC power |
62.5 VA / 32 W |
| of span |
= of the presently selected range |